UV-crosslinkable graphene-reinforced biodegradable nanocomposites using SLA 3D printing technology can potentially remove important cost barriers for personalized biological tissue engineering as compared to the traditional mold-based multistep methods.*
In the research article “Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds” by Zuying Feng et al., the authors present how they developed a UV-curable, 3D-printable and biodegradable resin.*
NANOSENSORS PointProbe®Plus PPP-FMR AFM probes were used to study the morphology of the graphene flakes.*
Figure 4 (e) from «Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds” by Zuying Feng et al.: AFM image of graphene/FLG
* Zuying Feng, Yan Li, Liang Hao, Yihu Yang, Tian Tang, Danna Tang, Wei Xiong
Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds
Journal of Nanomaterials, Volume 2019, Article ID 9710264, 13 pages
https://doi.org/10.1155/2019/9710264
Please follow this external link to the full research article: https://www.hindawi.com/journals/jnm/2019/9710264/
Open Access The article “Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds” by Zuying Feng, Yan Li, Liang Hao, Yihu Yang, Tian Tang, Danna Tang, Wei Xiong is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/